Basin Properties |
The Basin type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | BottomLevel |
Bottom level
Unit: [m]
Default: 0
(Inherited from VolumeNode.) |
| Cover |
Reference to the cover of the manhole. The cover is of type INormalCover,
ISealedCover or ISpillingCover that are all derived from ICover
(Inherited from SewerNode.) |
| CriticalLevel | Obsolete.
Used in result presentation. Passed directly to the result file.
Unit: [m]
Default: 0
(Inherited from VolumeNode.) |
| Geometry |
Basin geometry, with water level, flow area, and surface area data
|
| GroundLevel |
Level of ground at the node.
Unit: [m]
Default: 0
(Inherited from VolumeNode.) |
| HeadLossParameterSet |
Head loss parameters for this particular node.
(Inherited from Node.) |
| Id |
Node textual identification
(Inherited from Node.) |
| InfiltrationParameters |
Infiltration parameters
|
| IsClosed | Flag indicating if basin is closed. If the basin is closed, then surface area is not restricted to be monotonically increasing. Open basins counts in flooded area. Default is closed. |
| MaxInflowFromSurface |
Maximum inflow from surface, i.e. rainfall runoff type inflows.
(Inherited from VolumeNode.)The node inflow from surface can be limited by the surface opening, a sewer grate or similar. Unit: [m3/s]. Default: Double.MaxValue |
| Porosity |
The porosity is the ratio of empty air in that basin.
Empty basins will have porosity = 1 (default)
|
| PressureReachNodeType |
Type of pressure reach node, used for pressurized sections of the network.
Default: None
(Inherited from Node.) |
| PressureReachTailCrestLevel |
Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section
(Inherited from Node.)Only applicable when PressureReachNodeType is Tail. Unit: [m] |
| XCoordinate |
X-coordinate
Unit: [m]
Default: Constants.DOUBLE_DELETE_VALUE
(Inherited from Node.) |
| YCoordinate |
Y-coordinate
Unit: [m]
Default: Constants.DOUBLE_DELETE_VALUE
(Inherited from Node.) |
See Also