LeapingWeir Properties |
The LeapingWeir type exposes the following members.
Name | Description | |
---|---|---|
![]() | CdaAlpha |
Alpha in the cda = alpha - beta * psiBeta
Default value is 0.61 |
![]() | CdaBeta |
Beta in the cda = alpha - beta * psiBeta
Default value is 0.1 |
![]() | HeadLossParameterSet |
Head loss parameters for this particular node.
(Inherited from Node.) |
![]() | Id |
Node textual identification
(Inherited from Node.) |
![]() | OutletReachId |
ID of the outlet reach
|
![]() | PressureReachNodeType |
Type of pressure reach node, used for pressurized sections of the network.
Default: None
(Inherited from Node.) |
![]() | PressureReachTailCrestLevel |
Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section
(Inherited from Node.)Only applicable when PressureReachNodeType is Tail. Unit: [m] |
![]() | WeirLength |
Length of a leaping weir.
Unit: [m]
Default: 0
|
![]() | WeirWidth |
Width of a leaping weir.
Unit: [m]
Default: 0
|
![]() | XCoordinate |
X-coordinate
Unit: [m]
Default: Constants.DOUBLE_DELETE_VALUE
(Inherited from Node.) |
![]() | YCoordinate |
Y-coordinate
Unit: [m]
Default: Constants.DOUBLE_DELETE_VALUE
(Inherited from Node.) |