IUndergroundNode Properties

Level of ground at the node. Unit: [m] Default: 0

Head loss parameters. Can be null

Node identification string

Maximum inflow from surface, i.e. rainfall runoff type inflows.

The node inflow from surface can be limited by the surface opening, a sewer grate or similar.

Unit: [m3/s]. Default: Double.MaxValue

Type of pressure reach node, used for pressurized sections of the network. Default: None

Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section

Only applicable when PressureReachNodeType is Tail.

Unit: [m]

X-coordinate of the node

Y-coordinate of the node