public class RainBarrel : LIDBaseOffers, IStormwaterLID,
IStormwaterLIDFlowStat, IModelStateReadWrite| RainBarrel | Initializes a new instance of the RainBarrel class |
| Areas | A list specifying part of LID area on catchment surfaces. |
| BarrelArea | Area of (all) barrels handled by this instance. |
| CollectingAreas |
A list specifying LID collecting areas on catchment surfaces.
When entry with the same SurfaceID is also present in Areas then the entry in this list correspond to additional collecting area, which will define collecting surface. This effectively gives that the sum of all collecting areas may be smaller than TotalCollectingArea. |
| Connections | A list specifying connection to other LIDs where the water needs to be transferred. |
| Evaporation |
Evaporation in the LID at the current time step
Unit: [m/s]
(Inherited from LIDBaseOffers) |
| FlowStat | Flow statistics and mass balance |
| FractionOfLIDFlowToRoute |
Fraction of runoff flow from the LIDs that are routed by the catchment.
The remainder will be added directly to the catchment runoff (not routed).
The different catchment types may treat this differently. Default value: 1. Unit: [fraction] |
| Infiltration |
Infiltration in the LID at the current time step
Unit: [m/s]
(Inherited from LIDBaseOffers) |
| InitialSaturation |
Initial saturation fraction.
For storage, this fraction is used to calculate the initial storage depth. Default value: 0. Unit: [fraction]. |
| Name | Name of the LID |
| ReportPath |
Path and name for report file.
If null or empty, no report file is created. Use only for testing and validating model - file can become quite big. |
| Runoff | Current runoff from LID [m3/s] |
| Storage | Storage of barrel |
| TotalCollectingArea |
Total collecting area is the area from which water is routed through the LIDS,
either because rain is falling directly on the LIDs (Area) or
when catchment rain (after losses) is routed to the LIDs.
This area is used by the catchment to figure out how much water should be
routed to the LIDs, effectively splitting the catchment area in 3 parts:
The TotalCollectingArea cannot be smaller than Area. The sum of all TotalCollectingArea for all LIDs within a single catchment must be less than the area of the catchment they belong to. |
| AddInflow | Add inflow (run-on from catchment to LID) |
| AddToOffers |
Add LID offers to provided lists of offers and offer delegates.
(Overrides LIDBaseOffersAddToOffers(IListIQuantity, IListFuncDouble)) |
| ApplyBoundary(CatchmentSourceBoundaryTypes, IBoundarySource) | No effect, rain barrels does not accept any boundaries |
| ApplyBoundary(GlobalSourceBoundaryTypes, GlobalGeoLocatedSource) | No effect, rain barrels does not accept any boundaries |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) |
| Finish | Finish simulations |
| GetHashCode | Serves as the default hash function. (Inherited from Object) |
| GetType | Gets the Type of the current instance. (Inherited from Object) |
| Initialize | Initialize LID |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
| PerformTimeStep(DateTime, DateTime) | Take time step and calculate the rain rate and potential evaporation rate from boundaries |
| PerformTimeStep(DateTime, DateTime, Double, Double) | Take time step with provided rain rate and evaporation rate |
| Prepare | Prepare LID |
| PrepareForTimeStep | Take time step |
| ReadState | Read state and apply to module. Returns true if state was successfully read. |
| StateUpdated | When state has been updated, this method can be called to update derived/computational variables |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Validate | Validate LID |
| WriteState | Write current state of module |
| _flowStat | Flow statistics and mass balance |
| _reportPath |
Path and name for report file.
If null or empty, no report file is created. Use only for testing and validating model - file can become quite big. |
| SetSoilMoisture |
Set soil/pavement moisture of lid, independent of type.
If lid does not have a soil/pavement layer, an exception is thrown (Defined by LIDExtension) |
| SetStorageDepth |
Set storage depth of lid, independent of type.
If lid does not have a storage layer, an exception is thrown (Defined by LIDExtension) |
| SetSurfaceDepth |
Set surface depth of lid, independent of type.
If lid does not have a surface layer, an exception is thrown (Defined by LIDExtension) |
| SoilMoisture |
Get soil/pavement moisture of lid, independent of type.
If lid does not have a soil/pavement layer, an exception is thrown (Defined by LIDExtension) |
| StorageDepth |
Get storage depth of lid, independent of type.
If lid does not have a storage layer, an exception is thrown (Defined by LIDExtension) |
| SurfaceDepth |
Get surface depth of lid, independent of type.
If lid does not have a surface layer, an exception is thrown (Defined by LIDExtension) |
| ValidateConnections |
Validate LID surface connections and total routing fraction
(Defined by LIDExtension) |