Click or drag to resize

ExtendedHonmaWeir Properties

The ExtendedHonmaWeir type exposes the following members.

Properties
  NameDescription
Public propertyAlpha
Imperfect overflow parameter. Unit: [] Default: 0.03
Public propertyBeta
Imperfect overflow parameter. Unit: [] Default: 1.018
Public propertyCoefficientA
Perfect overflow parameter. Unit: [] Default: 1.02
Public propertyCoefficientB
Perfect overflow parameter. Unit: [] Default: 1.37
Public propertyCoefficientP
Perfect overflow parameter. Unit: [] Default: 1
Public propertyCoefficientQ
Imperfect overflow parameter. Unit: [] Default: 1
Public propertyCoefficientR
Submerged overflow parameter. Unit: [] Default: 1
Public propertyCrestHeight
Height at crest. Unit: [m] Default: 0
Public propertyCrestLevel
Crest level. Unit: [m] Default: 0
Public propertyCrestWidth
Width at crest. Unit: [m] Default: 0
Public propertydDischargedDownStreamWaterLevel
Calculated Discharge derivative with DownStreamWaterLevel. Downstream is relative to the direction of chainage. The value is calculated by SetWaterLevels. Unit: [m^2/s]
(Inherited from Structure.)
Public propertydDischargedUpStreamWaterLevel
Calculated Discharge derivative with UpStreamWaterLevel. Upstream is relative to the direction of chainage. The value is calculated by SetWaterLevels. Unit: [m^2/s]
(Inherited from Structure.)
Public propertyDelhs
Linear flow variation. For water level differences less than delhs use a linear Q variation between h1-h2=delhs and h1-h2=0. This is to avoid stability problems for small water level differences where dQdh goes to infinity. Unit: [m] Default: 0.01
Public propertyDelta
Submerged overflow parameter. Unit: [] Default: 2.6
Public propertyDischarge
Calculated Discharge. The value is calculated by SetWaterLevels. Unit: [m^3/s]
(Inherited from Structure.)
Public propertyDownstreamWaterLevel
Downstream water level.Downstream refers to the direction of chainage. The water level is set by use of SetWaterLevels Unit: [m]
(Inherited from Structure.)
Public propertyExtensionData
Property used by (de)serializer, when it can not find proper target for a data field. Support of forward compatible data contracts.
(Inherited from Structure.)
Public propertyFlowArea
Flow area through structure. Used by most (but not all) structures.
(Inherited from Structure.)
Public propertyFlowFactor
The discharge (and discharge derivatives) are scaled by the flow factor.
(Inherited from Structure.)
Public propertyGamma
Submerged overflow parameter. Unit: [] Default: 0
Public propertyhdhu_P
Perfect overflow parameter. Unit: [] Default: 0.6
Public propertyhdhu_S
Submerged overflow parameter. Unit: [] Default: 0.7
Public propertyHorizontalOffSetFromMarker2
Value used when plotting the structue Unit: [m] Default: 0
Public propertyID
Structure ID
(Inherited from Structure.)
Public propertyIDInUserUnit
Used to get a consistent description of the structure. The ID comes in user units. Used e.g. when reporting errors, warnings and hints.
(Inherited from Structure.)
Public propertyImplicit
Flag to control if the structure is implicit or explicit. If the structure is explicit (Implicit == false) then the derivatives of the dicharge are always zero. Default value: true
(Inherited from Structure.)
Public propertyInvertLevelDownstream
Invert level down stream
(Overrides StructureInvertLevelDownstream.)
Public propertyInvertLevelUpstream
Invert level up stream
(Overrides StructureInvertLevelUpstream.)
Public propertyLength
Length of the structure. Unit: [m] Default value: 0m
(Inherited from Structure.)
Public propertyLocation
Location property.
(Inherited from Structure.)
Public propertyRunTimeDiagnostics
The getter is used to get a list of errors.
(Inherited from Structure.)
Public propertySideStructureBank
Bank side that side-structure is located on

If side structure contains reservoir, and has the Coordinate set, this is not used (and should be set to Undefined).

(Inherited from Structure.)
Public propertySideStructureReservoir
Reservoir at end of side structure. Null if not side structure, or no reservoir is defined
(Inherited from Structure.)
Public propertyStructureType
Type of structure
(Inherited from Structure.)
Public propertyTopoID
String used to identified cross sections
(Inherited from Structure.)
Public propertyType
Structure type, unique for each structure.
(Overrides StructureType.)
Public propertyUpstreamWaterLevel
Upstream water level. Upstream refers to the direction of chainage. The water level is set by use of SetWaterLevels Unit: [m]
(Inherited from Structure.)
Public propertyValve
Type of the valve Default: None
(Inherited from ValvedStructure.)
Top
See Also