LongTermStatisticsData Properties

Holder of read/write information

List of custom types stored in the data object and that must be serialized.

A custom type is e.g. a user implemented structure or catchment model. In order to store information on the custom type in the .m1dx file, the system needs to know which custom types are being used, and they must be added to this list.

Discharge threshold for accumulated event values

Dry Weather Flows reported in result file for LTS simulation.

Time step used to evaluate dry weather flow.

Do not start simulation if it rains less than EpsilonRain ( m3/s / m2 )

Holds data from an extended DataContract

Maximal number of times a failed job is recalculated.

Reduction factor of a time step after a failed job.

Flag specifying also to create a job list file in dfs0 format.

Flag specifying to create inflow time series used when determining the jobs.

Determines if the LTS simulation is generating job list.

Include DtMin and DtMax in job list file. Only included so that users can edit the joblist file later and modify for individual events

LTS initial conditions.

Job list creator type.

The job list read from or written to this file

Time step for job list generation. Default value is 1 minute.

Runtime stop conditions.

Job start conditions.

Job stop conditions.

After that much time it is allowed to jump after a rain event in job list generation. This values should be determined by the maximum delay time of the catchment. Default value is zero.

Combine two LTS events if they are less than MinimumTimeBetweenRain apart

LTS results are written to this file

Old LTS result specifications, which are obsoleted.

Specifications on how to write result files, when, what to include and where.

Simulation time before job for live catchment discharge.

Simulation time before job for live NAM catchments.

Simulation time before job for surface model catchments.