Click or drag to resize

UrbanRiverLink Methods

The UrbanRiverLink type exposes the following members.

Methods
  NameDescription
Public methodAdjustWaterLevelBoundaryValue
Adjust water level boundary value. When external water depth is small, a similar small depth is applied to MIKE 1D, handling differences in external and 1D bottom levels.
(Inherited from StandardLink.)
Public methodApplyExponentialSmoothing
Apply smoothing on the water level value.

Smoothing must be applied after calling AdjustWaterLevelBoundaryValue.

(Inherited from StandardLink.)
Public methodApplyWaterLevelBoundary
Public methodAssignExternalConcentrationsToOutletBoundary
Assign external concentrations to outlet boundary.
(Inherited from StandardLink.)
Public methodAssignExternalWaterLevelToOutletBoundary
Assign water level to outlet boundary.
(Inherited from StandardLink.)
Public methodCheckLinkBottomLevels
Check bottom levels of outlet and surface, and produce a warning if there is a mismatch.
(Inherited from StandardLink.)
Public methodEquals
Determines whether the specified object is equal to the current object.
(Inherited from Object.)
Protected methodFinalize
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object.)
Public methodGetDischarge
Discharge out of link into external model, positive into external model.
(Inherited from StandardLink.)
Public methodGetExternalConcentration
Set boundary concentration for component at index compj, i.e. concentration on the outside of the network.
(Inherited from StandardLink.)
Public methodGetHashCode
Serves as the default hash function.
(Inherited from Object.)
Public methodGetInternalConcentration
Outflow concentration, concentration in MIKE 1D.
(Inherited from StandardLink.)
Public methodGetLinkNode
Get outlet/link node
(Inherited from StandardLink.)
Public methodGetM1DGroundLevel
Internal ground level
(Inherited from StandardLink.)
Public methodGetOutflowDirectionAngle
Get compass heading in degrees of outlet outflow direction.
(Inherited from StandardLink.)
Public methodGetSourcePointConcentration
Public methodGetSourcePointWaterLevel
Get raw water level from source point
Public methodGetSourceWaterLevel
Get water level from source point, and adjust for bottom levels from each side of the link. Water level is stored for later use
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodGetWaterLevel
Water level on the internal side of the link
(Inherited from StandardLink.)
Public methodGetWaterLevelBoundaryValue
Get value of the water level that was applied to the outlet boundary
(Inherited from StandardLink.)
Public methodInitialize
Initialize standard link
(Inherited from StandardLink.)
Public methodInitializeComponents
Protected methodInitializeDischargeGetters (Inherited from StandardLink.)
Protected methodInitializeOutletBoundary (Inherited from StandardLink.)
Public methodInitializeSourceWaterLevelGetter(EngineNet, EngineNode)
Public methodInitializeSourceWaterLevelGetter(EngineNet, EngineReach, HGridPoint)
Public methodInitializeWaterLevelGetter (Inherited from StandardLink.)
Protected methodMemberwiseClone
Creates a shallow copy of the current Object.
(Inherited from Object.)
Public methodPrepareAD
Prepare running with AD. Setting up AD boundaries on outlet.
(Inherited from StandardLink.)
Public methodPrepareHD
Prepare link, reassing boundary to network
(Inherited from StandardLink.)
Protected methodSet1DBottomLevel (Inherited from StandardLink.)
Protected methodSet1DGroundLevel (Inherited from StandardLink.)
Public methodSetExternalConcentration
Set boundary concentration for component at index compj, i.e. concentration on the outside of the network.
(Inherited from StandardLink.)
Public methodSetExternalConcentrations
Set external concentrations for all components
(Inherited from StandardLink.)
Public methodSetExternalCoupledArea
Set the external coupled area
(Inherited from StandardLink.)
Public methodSetExternalGroundLevel
Set the external ground level
(Inherited from StandardLink.)
Public methodSetExternalWaterLevel
Set external water level
(Inherited from StandardLink.)
Public methodSetInternalComponentInfo
Id of internal components.

Required for setting up the internal boundary condition.

(Inherited from StandardLink.)
Public methodSetLinkNode
Set outlet/link node.
(Inherited from StandardLink.)
Public methodSetSourcePointComponentSource(IComponentSourcePoint)
Public methodSetSourcePointComponentSource(EngineNet, EngineReach, Int32)
Public methodSetupSourceCoupling
Public methodToString
Returns a string that represents the current object.
(Inherited from Object.)
Public methodTransferState
Prepare for time step, transferring current values to "old" values state
(Inherited from StandardLink.)
Top
See Also