Click or drag to resize

CatchmentNam Fields

The CatchmentNam type exposes the following members.

Fields
  NameDescription
Protected field_additionalFlow
Additional constant flow added to the total runoff Unit: [m3/s] Default: 0
(Inherited from Catchment.)
Protected field_additionalFlowOld
Additional constant flow at start of time step
(Inherited from Catchment.)
Protected field_area
Total area of catchment. Type: Catchment area. Unit: [m2]. Default: 1e8 (100 km2).
(Inherited from Catchment.)
Protected field_boundarySourceEvaporation
Evaporation boundary source
(Inherited from Catchment.)
Protected field_boundarySourceRainfall
Rainfall boundary source
(Inherited from Catchment.)
Protected field_boundarySourceTemperature
Temperature boundary source
(Inherited from Catchment.)
Protected field_checkPointTime
The most recent check point time.
(Inherited from Catchment.)
Protected field_cropCoeffs
Variables holding the seasonal crop coefficients Type: Dimensionless factor Unit: [] Default: 1
(Inherited from CatchmentNamData.)
Protected field_effectiveTimeStep
Time step used in the simulation, it may change. It is set in Prepare to _timeStep, and can be updated by individual catchment models when required, i.e. it may differ from _timeStep.
(Inherited from Catchment.)
Protected field_endTime
Return the end time of the catchment simulation. This is set during prepare, and the catchment must make sure not to run beyond this time.
(Inherited from Catchment.)
Protected field_includeSnow
This flag tells if snow is included in the calculation Default: false
(Inherited from CatchmentNamData.)
Protected field_maximumFlow
Maximum flow
(Inherited from Catchment.)
Protected field_minimumFlow
Minimum flow
(Inherited from Catchment.)
Protected field_minTime
Proteced MinTime
(Inherited from Catchment.)
Protected field_offerDelegates
List of delegates, matching list of _offers
(Inherited from Catchment.)
Protected field_offers
List of datatypes offered in GetValue
(Inherited from Catchment.)
Protected field_runoff
Total runoff from catchment at present time step. Unit: [m^3/s]
(Inherited from Catchment.)
Protected field_runtimeDiagnostics
Diagnostics instance for a Catchment. Used during runtime.
(Inherited from Catchment.)
Protected field_startTime
Protected start time of catchment data - the earliest time for which the catchment can return data
(Inherited from Catchment.)
Protected field_stateVariableLoss
Losses in [m3/s]
(Inherited from CatchmentState.)
Protected field_stateVariableNetRainfall
Net rainfall in [m/s]
(Inherited from CatchmentState.)
Protected field_stateVariableTotalInfiltration
Total infiltration in [m/s]
(Inherited from CatchmentState.)
Protected field_stateVariableTotalRunOff
Total Runoff in [m3/s]. It includes also AdditionalFlow.
(Inherited from CatchmentState.)
Protected field_stormwaterLIDs
List of Lids
(Inherited from Catchment.)
Protected field_timeNew
Variable holding information on the latest calculated time
(Inherited from Catchment.)
Protected field_timeOfLastUpdate
Last time the state of this catchment was updated (Update(DateTime) was called)
(Inherited from Catchment.)
Protected field_timeOfMaximumFlow
Time of maximum flow
(Inherited from Catchment.)
Protected field_timeOfMinimumFlow
Time of minimum flow
(Inherited from Catchment.)
Protected field_timeOld
Variable holding information on the latest calculated time
(Inherited from Catchment.)
Protected field_timeStep
Time step used in the simulation, or initial time step if the time step can change.
(Inherited from Catchment.)
Protected field_timeStepInHours
Time step used in the NAM rainfall runoff model Unit: [hours]
(Inherited from CatchmentNamData.)
Protected field_totalAdditionalInflowVolume
Total volume of additional inflow
(Inherited from Catchment.)
Protected field_totalLossVolume
Total volume of loss
(Inherited from Catchment.)
Protected field_totalRainfallVolume
Total volume of rain
(Inherited from Catchment.)
Protected field_totalRunoffVolume
Total volume of runoff
(Inherited from Catchment.)
Protected field_tsBuffer
TSBuffer to use when accessing time series objects Set in Catchments.Add(). If not set, then the inheritors must create a TSBuffer before using it.
(Inherited from Catchment.)
Protected field_useHotStartFile
Flag telling if initial conditions is taken from a hotstart file Default: false
(Inherited from Catchment.)
Protected field_volumeOnGroundAdded
Volume on ground added after UpdateStorage
(Inherited from Catchment.)
Protected field_volumeOnGroundAfterRouting
Volume on ground after routing
(Inherited from Catchment.)
Protected field_volumeOnGroundBeforeRouting
Volume on ground before routing
(Inherited from Catchment.)
Protected field_yearlyStatistics
Dictionary of statistics as a function of year
(Inherited from Catchment.)
Public fieldCatchmentPlugins
List of catchment plugins
(Inherited from Catchment.)
Public fieldValueBuffer (Inherited from Catchment.)
Top
See Also