IManhole Properties

Bottom level, which can differ from the levels of the connecting reaches. Unit: [m] Default: 0

Reference to the cover of the manhole. The cover is of type INormalCover, ISealedCover or ISpillingCover that are all derived from ICover

Used in result presentation. Passed directly to the result file. Unit: [m] Default: 0

Inner diameter of the manhole Unit: [m] Default: 1

Level of ground at the node. Unit: [m] Default: 0

Head loss parameters. Can be null

Node identification string

Maximum inflow from surface, i.e. rainfall runoff type inflows.

The node inflow from surface can be limited by the surface opening, a sewer grate or similar.

Unit: [m3/s]. Default: Double.MaxValue

Type of pressure reach node, used for pressurized sections of the network. Default: None

Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section

Only applicable when PressureReachNodeType is Tail.

Unit: [m]

X-coordinate of the node

Y-coordinate of the node