public class XSRectangularPreprocessed : XSBase| XSRectangularPreprocessed | Constructor |
| AutoProcess |
Automatically calculate processed data if
1) They are missing
2) They are not up-to-date (ProcessedDataStatus is NotUpdated)
(Inherited from XSBase) |
| BottomLevel |
Lowest level of the processed data.
(Overrides XSBaseBottomLevel) |
| CrossSectionType |
Type of cross section
(Inherited from XSBase) |
| EquidistantLevels |
Flag to indicate whether equidistant levels are used.
(Inherited from XSBase) |
| FlowResistance |
Flow resistance. Contains information on flow resistance type
(ManningM or Chezy, Z dependence etc) and flow resistence values.
(Inherited from XSBase) |
| HasProcessedData | (Inherited from XSBase) |
| Height |
Height of the cross section.
(Overrides XSBaseHeight) |
| Interpolated |
Returns true if the CrossSection is interpolated from other cross sections
(Inherited from XSBase) |
| IsOpen |
Return true if cross section is open
(Inherited from XSBase) |
| MaximumStorageWidth |
Maximum storage width of the cross section
(Overrides XSBaseMaximumStorageWidth) |
| ModifiedFormulation |
Gets the Resistance Formulation that matches
the GetResistanceFactor(Int32, Double) value.
This is not necessarily the same as in FlowResistance. but can be different for several reasons: a) The raw and processed data differ, as for DarcyWeisbach. b) The resistance factors have been modified, and values used are those in ModifiedResistanceFactors. (Inherited from XSBase) |
| ModifiedResistanceFactors |
Modified resistance factors. These will be different than ProcessedResistanceFactors
if one of the Multiply functions has been executed. This is matching the ModifiedFormulation (Inherited from XSBase) |
| MorphologicalDivision |
When MorphologicalDivisionType is Level,
specifies the level of morphological division
For ST modeling only. Level is relative to raw data, and must not include any datum offset (Inherited from XSBase) |
| MorphologicalDivisionType |
Specifies the type of morphological division
that is applied.
For ST modeling only. (Inherited from XSBase) |
| NumberOfProcessedLevels |
returns the number of processed levels (same as dimension of all processed data
arrays). Returns 0 if processed data have not been calculated, yet.
(Inherited from XSBase) |
| ProcessedAdditionalSurfaceAreas |
Processed additional storage area
(Inherited from XSBase) |
| ProcessedAreas |
Processed geometric areas
(Inherited from XSBase) |
| ProcessedDataProtected |
false: data are not protected and will be recomputed.
true: processed data are protected, data has been manually updated and will not be recomputed.
(Inherited from XSBase) |
| ProcessedDataStatus |
ProcessingStatus defines the status of the processed data of this cross section.
Whenever the user updates raw data of the cross section, its state must be changed
to NotUpdated.
(Inherited from XSBase) |
| ProcessedDerivatives |
Flag specifying whether processed derivatives are stored
as processed data arrays, or calculated directly. If true,
processed data arrays for the derivatives are created
(most accurate, smooth interpolation)
(Inherited from XSBase) |
| ProcessedFlowAreas |
Processed flow areas
(Inherited from XSBase) |
| ProcessedLevels |
Processed levels
(Inherited from XSBase) |
| ProcessedRadii |
Processed radii
(Inherited from XSBase) |
| ProcessedRadiiDerivatives |
Processed radii
(Inherited from XSBase) |
| ProcessedResistanceFactors |
Processed resistance factors. Their type corresponds to the
Resistance formulation specified in FlowResistance.
(Inherited from XSBase) |
| ProcessedStorageWidths |
Processed storage widths
(Inherited from XSBase) |
| ProcessingLevelsSpecs |
Access to all level-related specifications for pre-processing of cross section
data
(Inherited from XSBase) |
| RectangleHeight | Gets and sets the width. Also sets the width in any children |
| RectangleWidth | Gets and sets the width. Also sets the width in any children |
| RelativeConveyanceCutoff |
If processed data has been modified to assure that conveyance
never decrease with increasing water levels, this value indicates
at which level (relative to height) that the change started.
Only relevant for closed cross sections. Default value is 1. (Inherited from XSBase) |
| TopLevel |
Lowest level of the processed data.
(Overrides XSBaseTopLevel) |
| TopoID |
The TopoID set that this cross section belongs to. TODO: See where for details?
(Inherited from XSBase) |
| AdjustProcessedLevels(Double) |
Adjust the processed levels. Used to ensure that _processedLevels[0] has a certain value
(Inherited from XSBase) |
| AdjustProcessedLevelSpecs |
Adjust the processed level specification.
(Inherited from XSBase) |
| BottomLevelFromCenter |
Return the bottom level of the cross section at a distance dx from
the center of the cross section. Throws an exception if dx is larger than
half the cross section width.
(Overrides XSBaseBottomLevelFromCenter(Double)) |
| CalculateProcessedData |
Calculate processed data
(Overrides XSBaseCalculateProcessedData) |
| CalculateProcessedDataIfNeeded |
Calculate the processed levels, storage areas, radii, etc, ie, fill in all
ProcessedXXX properties if they are not up to date. Also called by getters for these properties if needed,
so usually, this method doesn't have to be called explicitly.
(Inherited from XSBase) |
| CheckProcessedData |
Validates that this cross sections is set up correctly.
(Inherited from XSBase) |
| ClearOriginalProcessedData |
Clear any stored processed data arrays
(Inherited from XSBase) |
| Clone |
Returns a deep clone. Note: Does not clone any children
(Overrides XSBaseClone) |
| ConvertModifiedResistanceFactorsIfNecessary |
Converts the modified resistance data to another formulation. Returns false if the
conversion could be performed.
Note: so far only few conversions are supported:
- from Manningsn to ManningsM;
(Inherited from XSBase) |
| ConvertRelativeResistanceMultiZones |
Converts the ProcessedResistanceFactors according
to a multizone set of absolute resistance values.
Each input factor is applied between each level seperator,
the first factor from -infinity to the first level, the second factor
from the first level to the second level, and the last factor
from the last level to infinity, i.e., the levelSeperators defines where
one factor takes over from the previous.
The factors array must be one longer than the levelSeperators array.
The relative resistance factor is taken into account also.
Results are stored in the ModifiedResistanceFactors
and those are used in the calculation.
(Inherited from XSBase) |
| CreateAllProcessedArrays |
Creates all processed data arrays with the given number of levels.
(Inherited from XSBase) |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) |
| GetActualMorphologicalDivision |
Get actual morphological division or top of cross section if not defined.
(Inherited from XSBase) |
| GetAdditionalSurfaceArea |
Additional storage area is a volume that the mass equation takes
into account, but it does not influence the momentum equation. It
could be a small pond next to the river that is filled/emptied as
the water level in the river raises/falss.
(Inherited from XSBase) |
| GetArea |
Return the cross sectional geometric area,
for index and fraction into the processed data.
(Inherited from XSBase) |
| GetAreaByIntegratingWidths |
Return the cross sectional geometric area,
integrating the storage widths
(Inherited from XSBase) |
| GetCriticalDepth |
Gets the Critical depth for a given discharge - [m3/s]
The critical depth is the depth where the flow changes
from supercritical to subcritical flow.
(Overrides XSBaseGetCriticalDepth(Double)) |
| GetCriticalDischarge |
Gets the Critical discharge for a given water level
The critical discharge is the discharge where the flow changes
from supercritical to subcritical flow.
(Overrides XSBaseGetCriticalDischarge(Double)) |
| GetFlowArea(Int32) |
Returns the wetted area.
(Overrides XSBaseGetFlowArea(Int32)) |
| GetFlowArea(Int32, Double) |
Returns the wetted area.
(Overrides XSBaseGetFlowArea(Int32, Double)) |
| GetFlowAreaDerivative |
Get storagewidth as dA/dh from neighboring values in processed XS areas at waterLevel.
(Inherited from XSBase) |
| GetHashCode | Serves as the default hash function. (Inherited from Object) |
| GetHydraulicRadius(Int32) |
Returns the hydraulic radius
(Overrides XSBaseGetHydraulicRadius(Int32)) |
| GetHydraulicRadius(Int32, Double) |
Returns the hydraulic radius
(Overrides XSBaseGetHydraulicRadius(Int32, Double)) |
| GetHydraulicRadiusDerivative |
Get the derivate of the hydraulic radius for index and fraction into the processed data.
(Inherited from XSBase) |
| GetLevelFromArea |
For a given area, find the level.
(Inherited from XSBase) |
| GetLocalFlowDistributionDepthFactor |
Calculates a local flow distribution factor for a given x along the cross sectional profile.
The result must be divided by GetFlowDistributionConveyance(Double).
The calculation is based on a parallel canal analysis, and if integrated up, matches the total discharge through the cross section. (Inherited from XSBase) |
| GetMaximumValues |
Set maximum area, maximum hydraulic radius and maximum storage width.
(Overrides XSBaseGetMaximumValues(Double, Double, Double)) |
| GetNaturalDepthOld |
Get the natural depth at a given discharge and slope
(Inherited from XSBase) |
| GetRadiusAboveProcessed | Returns the hydraulic radius for the given water depth above the processed data. |
| GetResistanceFactor |
Returns the resistance factor.
(Inherited from XSBase) |
| GetResistanceFactorsDerivative |
Get the derivative of the resistance factor at the given water level
(Inherited from XSBase) |
| GetStorageWidth(Int32) |
Returns the storage width
(Overrides XSBaseGetStorageWidth(Int32)) |
| GetStorageWidth(Int32, Double) |
Returns the storage width
(Overrides XSBaseGetStorageWidth(Int32, Double)) |
| GetType | Gets the Type of the current instance. (Inherited from Object) |
| GetVolumeFromAdditionalSurfaceArea |
Return the integrated additional surface area from the bottom of the top slot to waterLevel
(Inherited from XSBase) |
| InheritProcessedDataFrom |
Makes all processed data arrays point to the same arrays as in the other.
(reference copy, not value copy)
(Inherited from XSBase) |
| Initialize |
Calculate processed data if needed
(Inherited from XSBase) |
| Level |
Get the actual processed level at the given index. Works
regardless of the _equidistantLevels flag,
i.e., also when ProcessedLevels are not present.
Index must be between 0 and NumberOfProcessedLevels-1
otherwise it will fail or give incorrect results
(Inherited from XSBase) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
| Prepare |
Prepare cross section. Calculates processed data if needed
(Overrides XSBasePrepare(Diagnostics, HDParameterData, ILocation)) |
| ProcessedLevel |
Get the raw processed level at the given index. Works
regardless of the _equidistantLevels flag,
i.e., also when ProcessedLevels are not present.
Index must be between 0 and NumberOfProcessedLevels-1
otherwise it will fail or give incorrect results
(Inherited from XSBase) |
| RemoveAllProcessedData |
Removes all processed data arrays.
(Inherited from XSBase) |
| RestoreModifiedResistanceFactors |
if Multiply... or Convert... or similar was called earlier,
reset the modified resistance factors
to the original processed resistance factors
(Inherited from XSBase) |
| RestoreOriginalProcessedData |
Restores any stored processed data arrays previously
stored.
(Inherited from XSBase) |
| SaveOriginalProcessedData |
Store the current processed data arrays (shallow copy).
If a set of original processed data already exists, the original
set is kept and not overwritten.
Updating the ProcessedLevels will still update the original processed data, unless new processed data has been provided, i.e. by using CreateAllProcessedArrays(Int32) or SetAllProcessedValues(Double, Double, Double, Double, Double, Double), due to the shallow copy. The original processed data arrays are kept when setting new processed data, using e.g. SetAllProcessedValues(Double, Double, Double, Double, Double, Double) (Inherited from XSBase) |
| SetAllProcessedValues |
set all the processed data (references to the member array).
All values are in SI.
(Inherited from XSBase) |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Validate |
Prepare the cross section. Not implemented.
(Overrides XSBaseValidate) |
| _bAutoProcess |
Allow CalculateProcessedDataIfNeeded. Set to false to disable
(Inherited from XSBase) |
| _bProcessedDataProtected |
false: data are not protected and will be recomputed.
true: processed data are protected, data has been manually updated and will not be recomputed.
(Inherited from XSBase) |
| _crossSectionType |
Type of cross section.
(Inherited from XSBase) |
| _distanceBetweenLevels |
The distance between levels if equidistant levels are ued.
If equidistant levels are used, then getIndex and getFraction are faster.
(Inherited from XSBase) |
| _equidistantLevels |
Flag to indicate whether equidistant levels are used.
If equidistant levels are used, then getIndex and getFraction are faster.
Each derived cross section must set this flag to true (during construction),
if it does not store levels in the _processedLevels array.
(Inherited from XSBase) |
| _flowResistance |
Flow resistance
(Inherited from XSBase) |
| _height | (Inherited from XSBase) |
| _isInitialized |
Flag defining whether Initialize has been called.
(Inherited from XSBase) |
| _isPrepared |
Flag defining whether Prepare(Diagnostics, HDParameterData, ILocation) has been called.
(Inherited from XSBase) |
| _modifiedFormulation |
Flow resistance formulation
(Inherited from XSBase) |
| _modifiedResistanceFactors |
Modified resistance factors. As default points to _processedResistanceFactors,
but during simulation contains resistance factors that are supported by the engine, which may
differ from the original values.
(Inherited from XSBase) |
| _modifiedResistanceFactorsDerivatives |
Processed resistance factor derivatives for the modified resistance factors.
(Inherited from XSBase) |
| _numberOfProcessedLevels |
The number of processed levels
(Inherited from XSBase) |
| _originalProcessedData |
A copy of original processed data, in case they have
been modified by the engine during the simulation.
(Inherited from XSBase) |
| _processedAdditionalSurfaceAreas |
Processed additional storage areas
(Inherited from XSBase) |
| _processedAreas |
Processed geometric areas
(Inherited from XSBase) |
| _processedCriticalDischarges |
Table with processed critical discharges, created automatically when required.
(Inherited from XSBase) |
| _processedDataStatus |
ProcessingStatus defines the status of the processed data of this cross section.
Whenever the user updates raw data of the cross section, its state must be changed
to NotUpdated.
(Inherited from XSBase) |
| _processedDerivatives |
Flag specifying whether processed derivatives are stored
as processed data arrays, or calculated directly. If true,
processed data arrays for the derivatives are created
(most accurate, smooth interpolation)
(Inherited from XSBase) |
| _processedFlowAreas |
Processed flow ares
(Inherited from XSBase) |
| _processedLevels |
Processed depths
(Inherited from XSBase) |
| _processedRadii |
Processed radii
(Inherited from XSBase) |
| _processedRadiiDerivatives |
Processed radius derivatives
(Inherited from XSBase) |
| _processedResistanceFactors |
Processed resistance factors
(Inherited from XSBase) |
| _processedStorageWidths |
Processed storage widths
(Inherited from XSBase) |
| _resistenceDistri |
Resistance distribution
(Inherited from XSBase) |
| GetConveyance |
Get the conveyance at the specified processed level
(Defined by CrossSectionExtensions) |