	Name	Description
	Blockage	Blockage is the ratio of flow in the inlet that is blocked by debris.
	dDischargedDownStreamWaterLevel	Calculated Discharge derivative with DownStreamWaterLevel. Downstream is relative to the direction of chainage. The value is calculated by SetWaterLevels. Unit: [m^2/s] (Inherited from Structure.)
	dDischargedUpStreamWaterLevel	Calculated Discharge derivative with UpStreamWaterLevel. Upstream is relative to the direction of chainage. The value is calculated by SetWaterLevels. Unit: [m^2/s] (Inherited from Structure.)
	DepthQRelation	Table of Q values in the inlet as a function of depth in the source node.
	Discharge	Calculated Discharge. The value is calculated by SetWaterLevels. Unit: [m^3/s] (Inherited from Structure.)
	DownstreamWaterLevel	Downstream water level.Downstream refers to the direction of chainage. The water level is set by use of SetWaterLevels Unit: [m] (Inherited from Structure.)
	ExtensionData	Property used by (de)serializer, when it can not find proper target for a data field. Support of forward compatible data contracts. (Inherited from Structure.)
	FlowArea	Flow area through structure. Used by most (but not all) structures. (Inherited from Structure.)
	FlowFactor	The discharge (and discharge derivatives) are scaled by the flow factor. (Inherited from Structure.)
	Freeboard	Freeboard is the distance between the invert level of the inlet to the maximum downstream water level. If the downstream water level exceeds the inlet level minus the freeboard, then the inlet functions as an orifice instead of a storm water inlet.
	Height	Height of the inlet when it functions as an orifice.
	ID	Structure ID (Inherited from Structure.)
	IDInUserUnit	Used to get a consistent description of the structure. The ID comes in user units. Used e.g. when reporting errors, warnings and hints. (Inherited from Structure.)
	Implicit	Flag to control if the structure is implicit or explicit. If the structure is explicit (Implicit == false) then the derivatives of the dicharge are always zero. Default value: true (Inherited from Structure.)
	InvertLevel	Invert level of the inlet.
	InvertLevelDownstream	Invert level down stream (Overrides StructureInvertLevelDownstream.)
	InvertLevelUpstream	Invert level up stream (Overrides StructureInvertLevelUpstream.)
	Length	Length of the structure. Unit: [m] Default value: 0m (Inherited from Structure.)
	Location	Location property. (Inherited from Structure.)
	NumberOfInlets	Number of inlets. The flow through the Stormwater Inlet structure is the flow through a single inlet multiplied by the number of inlets. Default: 1.
	OnGradeInlet	When true then the stormwater inlet is of the OnGrade type where inlet discharge is a function of the upstream discharge and the slope of the upstream reaches. If false, then the inlet discharge is a function of the upstream water level.
	QqRelations	List of Q values in the inlet as a function of q in the source pipe.
	RunTimeDiagnostics	The getter is used to get a list of errors. (Inherited from Structure.)
	SideStructureBank	Bank side that side-structure is located on If side structure contains reservoir, and has the Coordinate set, this is not used (and should be set to Undefined). (Inherited from Structure.)
	SideStructureReservoir	Reservoir at end of side structure. Null if not side structure, or no reservoir is defined (Inherited from Structure.)
	Slopes	List of slopes in the source pipe. These slopes are matching the values in the QqRelations.
	SourceDischargeGetter	Getter for the discharge through the source node.
	StructureType	Type of structure (Inherited from Structure.)
	TopoID	String used to identified cross sections (Inherited from Structure.)
	Type	Structure type, unique for each structure. (Overrides StructureType.)
	UpstreamWaterLevel	Upstream water level. Upstream refers to the direction of chainage. The water level is set by use of SetWaterLevels Unit: [m] (Inherited from Structure.)
	UserDefinedSlope	If UserDefinedSlope is set, then this value is used for the slope of the source pipe instead of the actual slope from the network geometry. Set to MinValue to disable the use of it.
	Width	Width of the inlet when it functions as an orifice

	Name	Description
	Accepts	List of data types that is accepted, i.e., that you can get a ValueSetter for. (Inherited from Structure.)
	AddQQRelation	Add a QQ relation for the specified slope. Must be added in order of increasing slope
	ApplyFlowFactor	Applies flow factor to discharge and it's derivatives (Inherited from Structure.)
	ClearQQRelations	Clear all QQ relations and slopes
	ControlSetFlowFactor	Set flow factor to specified value (Inherited from Structure.)
	Description	Return a string that describes this structure. Includes structure type and ID (Inherited from Structure.)
	Dispose	Frees the licenses held. (Inherited from Structure.)
	Equals	Determines whether the specified object is equal to the current object. (Inherited from Object.)
	ExplicitStructureSupport	DEBUG: This method is called from Prepare() if _implitcit == false to check if the structure supports being Explicit. Once all structures support explicit operation this method can be deleted. (Overrides StructureExplicitStructureSupport.)
	Finalize	Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.)
	GetControlAction	Get control action for the specified id. It always returns one of the ActionControl delegates. It will return null if controlActionId is not valid. Base implementation for IControllable (Inherited from Structure.)
	GetCurrentValue	Get the current value of the control for the specified id. Base implementation for IControllable (Inherited from Structure.)
	GetHashCode	Serves as the default hash function. (Inherited from Object.)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	Initialize(IDiagnostics)	Set up structure and set runtime diagnostics object (Inherited from Structure.)
	Initialize(ICrossSection, ICrossSection, Boolean, IDiagnostics)	Set up structure and set runtime diagnostics object (Overrides StructureInitialize(ICrossSection, ICrossSection, Boolean, IDiagnostics).)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	Offers	A list of quantities available from this structure (Inherited from Structure.)
	Prepare(HDParameterData, IDiagnostics)	Set up structure and set runtime diagnostics object (Inherited from Structure.)
	Prepare(DateTime, HDParameterData, IDiagnostics)	Set up structure and set runtime diagnostics object (Inherited from Structure.)
	ResetControlledState	Reset internal state (if any) used by controlling class. Called after a controlling class has performed a control sequence, and simulation is restarted. Base implementation for IControllable (Inherited from Structure.)
	SetControlStrategyId	Set control strategy ID manually. Base implementation for IControllable (Inherited from Structure.)
	SetInputWaterLevels	Set the _upstreamWaterLevel, _downstreamWaterLevel and _flowDir (Inherited from Structure.)
	SetSlope	Set the slope of source of the water coming in through the inlet.
	SetWaterLevels	Sets up- and down- stream water level and forces the calculation of the discharge and its derivatives. (Overrides StructureSetWaterLevels(Double, Double).)
	SetZeroFlow	Sets the conditions for zero flow (Inherited from Structure.)
	ToString	Returns a string that represents the current object. (Inherited from Object.)
	UpdatedWaterLevels	After a time step (or iteration) has finished, update the discharge to the actual value, based on the final water levels and the discharge derivatives. (Inherited from Structure.)
	Validate	Writes errors, warnings and hints into their respective member classes. The member objects are initially cleared. (Overrides StructureValidate.)
	ValueGetter	Get value setter for the specified data quantity (Overrides StructureValueGetter(Int32).)
	ValueSetter	Get value setter for the specified data type (Inherited from Structure.)

	Name	Description
	_accepts	List of quantities that are accepted (Inherited from Structure.)
	_controlStategyId	If the structure is being controlled, then _controlStategyId contains the ID of the active control strategy (Inherited from Structure.)
	_downstreamWaterLevel	Downstream water level, as set by SetWaterLevels(Double, Double) Unit: [m] (Inherited from Structure.)
	_dqdhDownstream	The derivative of flow through the structure with downstream water level. The flow is calculated in the derived classes when the SetWaterLevels method is called. Unit: [m2/sec] (Inherited from Structure.)
	_dqdhUpstream	The derivative of flow through the structure with upstream water level. The flow is calculated in the derived classes when the SetWaterLevels method is called. Unit: [m2/sec] (Inherited from Structure.)
	_flowArea	Flow area through structure. Used by most (but not all) structures. (Inherited from Structure.)
	_flowDir	FlowDir is used to determine which parameters to use for the flow calculations. Derived by the SetWaterLevels(Double, Double). (Inherited from Structure.)
	_id	Identification name of the structure (Inherited from Structure.)
	_implicit	If _implicit == false, then the derivatives are always zero. Default value: true. (Inherited from Structure.)
	_location	Location in the network (Inherited from Structure.)
	_offers	List of quantities that are offered (Inherited from Structure.)
	_q	Flow through the structure. The flow is calculated in the derived classes when the SetWaterLevels method is called. Unit: [m3/sec] (Inherited from Structure.)
	_runTimeDiagnostics	Diagnostics are written into this Diagnostics during calculations. Set during Initialize(IDiagnostics) (Inherited from Structure.)
	_topoID	Identification used to find referenced cross sections (Inherited from Structure.)
	_upstreamWaterLevel	Upstream water level, as set by SetWaterLevels(Double, Double) Unit: [m] (Inherited from Structure.)

	Name	Description
	Getter	From the proxy, return an FuncTResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. (Defined by ProxyExtensions.)
	Getters	Returns a set of FuncTResult for the quantity. We can return several quantities with the same id (usually they will differ in their description). If the quantity is not offerent, an empty list is returned. (Defined by ProxyExtensions.)
	GettersFraction	Returns a set of FuncT, TResult for the quantity. We can return several quantities with the same id (usually they will differ in their description). If the quantity is not offerent, an empty list is returned. (Defined by ProxyExtensions.)
	GetterUnboxed	From the proxy, return an FuncTResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. (Defined by ProxyExtensions.)
	Initialize(CrossSectionData, Boolean, IDiagnostics)	Overloaded. Helper function for some unit tests. Do not use. (Defined by StructureExtensions.)
	Initialize(BoundaryData, CrossSectionData, Boolean, IDiagnostics)	Overloaded. Helper function for some unit tests. Do not use. (Defined by StructureExtensions.)
	IsSideStructure	Returns true if the structure is a side structure (Defined by StructureExtensions.)
	Setter	From the proxy, return an IDoubleGetSet for the specified quantity. It returns the first quantity of that type that is accepted, and null if the quantity is not accepted. (Defined by ProxyExtensions.)

StormwaterInlet Class

Reference