ICatchmentUrbanDataInitialLossRecoveryRate Property

Recovery rate for initial loss capacity. The initial loss capacity is regenerated in dry periods by a linear recovery rate.

Used as constant evaporation, when evaporation is not defined explicitly. If evaporation is defined explicitly (see EvaporationFromTimeSeries), this is neglected.

For some catchment models it is only applied under dry conditions.

Unit: [m/s] Default: 0.00005 [m/hour]

double InitialLossRecoveryRate { get; set; }

Property InitialLossRecoveryRate As Double
	Get
	Set

property double InitialLossRecoveryRate {
	double get ();
	void set (double value);
}