DHI.Mike1D.Mike1DDataAccess Namespace

An abstract base controller class.

It handles everything related to the ControllerEvent an delegates the real work on to the derived classes in the DoXXX methods.

Additional parameter data.

Bridge for reading/writing control data to xml.

Class containing event data for the controller created event.

Class containing event data for the controller event.

Extension methods for the Controller

Data class for pipe design data

Contains item to optimize

Pipe design reach. The Control() method sets the Manning number of the _first_ XS in the underlying EngineReach. In MU setups, the cross section is shared between all points in the underlying reach, so in MU setups the Manning number of the whole reach will be controlled.

Write diagnostics items to an HTML file.

This class only utilizes the log-file rolling, and overrides the WriteHTMLContent(TextWriter) method.

Write a summary of a simulation to an HTML file.

A column that uses a getter to extract a TOut value from the row data object

This column does not support Accumulate.

An engine data column return a string value using a getter, which is independent of the IEngineDataItemT (static values).

An engine data column return a double value using a getter.

This column supports accumulation

An engine data column return a double value using a getter and including its own IEngineDataItemT, which must have the same data and structure as the one in the table.

This column supports accumulation

A table extracting values from IEngineDataItemT

Class containing the data describing the LTS simulation.

Bridge class for reading lont term statistics data to/from xml

Class describing dry weather flow in an LTS simulation.

LTSInitialCondition hold hot start information for the individual jobs in the LTS simulation

Base class for describing LTS job start/stop and runtime stop conditions.

LTS joblist

Class for creating an LTS job list.

The algorithm calculates the inflows only when it is raining. This effectively skips potential jobs where there is boundary inflow satisfying job start condition, but there is no active rain.

LTS job start condition.

LTS job stop condition.

Result specification of LTS results

LTS runtime stop condition.

Holds a list of LTSRuntimeStopCondition's that must all be satisfied for a job to stop (the LTSRuntimeStopConditions in the collection are combined with the logical "and" operator).

Bridge for reading the .m1da file, Mike 1D Additional setup file.

Common class for loading MIKE 1D setup from various known types of storages.

Currently supporting MIKE 11 (sim11), MIKE URBAN databases (mdb/gdb), MIKE HYDRO (mhydro) and MIKE 1D (m1dx).

Collection of MIKE 1D bridges, IMike1DBridge.

Register a new bridge by calling AddBridge(String, String, IMike1DBridgeFactory)

Factory that sets up and connects the control module with the engine net.

The Mike1DController is the entry point for an HD simulation, including any enabled modules (Rainfall runoff, AD, Control etc.)

It links the simulation setup with the actual engine setup. It controls initialization, start, stop and finalization of the engine.

The Mike1DControllerEM is the entry point for an HD simulation, including any enabled modules (Rainfall runoff, AD, Control etc.) It is primarely used by DA for the Ensemble Members.

It links the simulation setup with the actual engine setup. It controls initialization, start, stop and finalization of the engine.

Factory class for creating IMike1DController.

The controller can either be created based on the content of Mike1DData, or from a IConnection, in which case the data will also be loaded.

The factory handles log files. By default a new log is created every time a new controller is created, and the log file is closed when the controller finishes. You can disable log files by setting DisableLogFile and if you want to reuse a log file for several controllers (append to it), set manually your own LogFileWriter.

The Mike1DControllerLTS is the entry point for a Long Term Statistics simulation. It controls initialization, start, stop and finalization of the engine.

The Mike1DController is the entry point for automatic RR calibration.

It will loop through all catchments that has auto calibration enabled, and calibrate each of these individually. When the controller is done, it will update the catchment parameters to contain the optimal parameters.

Class that collects all DataAccess components in one place.

Extension methods for the MIKE 1D Data object

Bridge class for saving MIKE 1D data to XML, handling reading/writing the .m1dx file.

For loading a full setup, use the Mike1DBridge.

Log file writer for MIKE 1D engine.

Call Prepare to open the logfile. If prepare is not called, all writing to the logfile is ignored silently.

Factory that sets up an IResultData to retrieve values from an EngineNet

A IDataItem that can update itself based on an IDoubleVectorGetter

Class for reading MIKE 1D state file and apply to model.

Class for writing current state of a MIKE 1D model to a state file.

Write progress to standard out

Class containing event data for the special controller event.

Specification for when and how to write state outputs.

Special column that adds a G or a C flag in case of ground level or critical level has been exceeded.

Special column reporting total runoff of catchment.

It needs to be special to handle CatchmentCombined and not count in twice the runoff from each catchment.

An engine data column return a string value using a getter.

Helper class for assembly version information

Structure info for a generic IStructure

Structure info for a structure of type {T}

A SimulationEvent describes one of a series of simulations that are performed during the total runtime of the Long Term Simulation. A SimulationEvent is the same as am LTS "job" in MU terms.

An html table column for HTMLTableEngineDataItemT where the type of the column is {TOut}

Bridge interface, for loading a MIKE 1D setup from storage.

Factory class for creating IMike1DBridge, used by Mike1DBridge loader: You can register your own bridge using Mike1DBridgeCollection

The IMike1DController is the starting point for controlling and running a simulation. Depending on the underlying data components, the controller may do different things. Different data controllers may also do different things on the same data components. The following are examples of controllers:

• HD controller: runs an HD simulation, including add ons (rainfall runoff, AD etc.)
• RR controller: runs an RR simulation.
• RR calibration controller: runs an RR calibration.
• LTS controller: runs a LTS (Long Term Statistics) HD simulation.

Special interface for loading MIKE URBAN data into MIKE 1D within the MIKE URBAN GUI.

State of controller

Units of pipe design in/output

Pipe design criteria type

Pipe design reach group type

The type of optmization to perform

Runtime stop and job start/stop condition types.

Enum specifying what kind of algorithm to use when generating a job list.

Type of network locations for LTSJobConditions.

Specific reach locations to report LTS results on.

Type of LTS results

Type of parameter, for additional data

Type of result to create default result specifications for. Used in GetDefaultResultSpecification(ResultSpecificationTypes)