IResultData Methods |
The IResultData type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | Dispose |
Dispose of ressources
|
| Flush |
Saves the contents of the class using the defined connection.
|
| GenerateDerivedProperties |
Generate derived properties: ResultData.Quantities and ResultData.StructureTypes
|
| GetNumberOfDataItems |
Total number of data items.
|
| GetNumberOfElements |
Total number of elements.
|
| GetTimesAsArray |
Gettter for the time stamps contained. The time stamps are returned in a
[NumerOfTimeSteps, 7] array. A row contains
year, month, day, hour, minute, second, millisecond.
|
| GridPointsWithStructure |
List of gridpoints that contain a specific structure. Note: This is a derived property
|
| Load |
Loads results from a persistent media into memory. Load uses the connection object to
decide what and how it should load the data.
|
| Load(IDiagnostics) |
Loads results from a persistent media into memory. Load uses the connection object to
decide what and how it should load the data.
|
| LoadData |
Loads the dynamic data of the results from a persistent media into memory. The LoadHeader(IDiagnostics)
must already have been called.
|
| LoadHeader(IDiagnostics) |
Loads the header information of the results from a persistent media into memory. Load uses the connection
object to decide what and how it should load the data.
|
| LoadHeader(Boolean, IDiagnostics) |
Loads the header information of the results from a persistent media into memory. Load uses the connection
object to decide what and how it should load the data.
Using the filter argument the user may choose to load only a sub-selection of the entire data.
|
| Prepare |
Prepare the result data for new data. After this is called, the
result data should be ready to handle calls to Update(DateTime)
and UpdateAndFlushIfNeeded(DateTime).
This will usually open the file on the disc, making it ready to
write to the file.
|
| Save |
Saves the contents of the class using the defined connection.
|
| TriggerTimeStepEvent |
Trigger the time step event, e.g. in case a time step has been added, updated or before writing to file.
|
| Update(DateTime) |
The method pulls data into the result data access module and passes the data
to the dataItems.
|
| Update(DateTime, Int32) |
The method pulls data into the result data access module and passes the data
to the dataItems, storing it at the specifed updateIndex.
|
| UpdateAndFlushIfNeeded |
The methods checks if an update is needed for this time (time step). If so,
data is pulled into the result data object and passes the data to the dataItems.
After this it is tested whether the number of time steps kept in the DataItems are
larger or equal to MaxBufferSize. In case it is the data is flushed to persistant storage.
|
Extension Methods| Name | Description | |
|---|---|---|
 | FilterLoadsAllTimes |
Check if filter will load all time steps. Header must have been loaded, such that resultData
knows the extent in time of the data.
(Defined by ResultDataExtensions.) |
| InitializeTimeData |
Initialize all data items with default time-data objects. This can be used
when storing data for many time steps in a result data object, typically when reading.
(Defined by ResultDataExtensions.) |
| Quantities |
Extract all quantities of a result data object.
(Defined by ResultDataExtensions.) |
| QuantityDataItems |
Extract all quantities and dataitems of a result data object, grouped by their quantity
(Defined by ResultDataExtensions.) |
| RemoveTimestep |
Extract all quantities of a result data object.
(Defined by ResultDataExtensions.) |
| RemoveUnusedDataItems |
Remove unused data items from resultData object
(Defined by Res1DExtensions.) |
See Also