CatchmentFromTimeSeries Fields

Additional constant flow added to the total runoff Unit: [m3/s] Default: 0

Additional constant flow at start of time step

Total area of catchment. Type: Catchment area. Unit: [m2]. Default: 1e8 (100 km2).

Evaporation boundary source

Rainfall boundary source

Temperature boundary source

The most recent check point time.

Time step used in the simulation, it may change. It is set in Prepare to _timeStep, and can be updated by individual catchment models when required, i.e. it may differ from _timeStep.

Return the end time of the catchment simulation. This is set during prepare, and the catchment must make sure not to run beyond this time.

Maximum flow

Minimum flow

Proteced MinTime

List of delegates, matching list of _offers

List of datatypes offered in GetValue

Total runoff from catchment at present time step. Unit: [m^3/s]

Diagnostics instance for a Catchment. Used during runtime.

Protected start time of catchment data - the earliest time for which the catchment can return data

Losses in [m3/s]

Net rainfall in [m/s]

Total infiltration in [m/s]

Total Runoff in [m3/s]. It includes also AdditionalFlow.

List of Lids

Variable holding information on the latest calculated time

Last time the state of this catchment was updated (Update(DateTime) was called)

Time of maximum flow

Time of minimum flow

Variable holding information on the latest calculated time

Time step used in the simulation, or initial time step if the time step can change.

Total volume of additional inflow

Total volume of loss

Total volume of rain

Total volume of runoff

TSBuffer to use when accessing time series objects Set in Catchments.Add(). If not set, then the inheritors must create a TSBuffer before using it.

Flag telling if initial conditions is taken from a hotstart file Default: false

Volume on ground added after UpdateStorage

Volume on ground after routing

Volume on ground before routing

Dictionary of statistics as a function of year

List of catchment plugins