ICatchmentSWQ Interface |
Namespace: DHI.Mike1D.RainfallRunoffModule
Assembly: DHI.Mike1D.RainfallRunoffModule (in DHI.Mike1D.RainfallRunoffModule.dll) Version: 19.0.0.0 (11.1.1.1111)
SyntaxThe ICatchmentSWQ type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | Area |
Total area of catchment
Unit: [m2]
(Inherited from ICatchment.) |
| BoundarySourceRainfall |
Rainfall boundary
|
| CatchmentGeometry |
Get and set the list of coordinates of the catchment
(Inherited from ICatchment.) |
| CatchmentName |
Catchment name.
(Inherited from ICatchment.)The name is not unique, there may be several catchment models for one catchment, however all catchments with the same name should/must share the same catchment geometry. |
| CenterPoint |
Get and set the central point of the catchment
(Inherited from ICatchment.) |
| ClientName |
Title of the calibration plot
(Inherited from ICalibratable.) |
| CurrentTime |
Return the time of the current state.
(Inherited from ICatchment.) |
| EffectiveArea |
Effective area of catchment, where runoff takes place.
Unit: [m2]
(Inherited from ICatchment.) |
| EndTime |
Return the end time of the catchment simulation.
This is set during prepare, and the catchment must
make sure not to run beyond this time.
(Inherited from ICatchment.) |
| MinTime |
Minimum time to which Time can be set. The catchment must caches values from MinTime to the
max value of Time.
(Inherited from ICatchment.) |
| ModelId |
Catchment model ID. Unique id.
(Inherited from ICatchment.) |
| Name | Obsolete.
Same as ModelId - for backward compatibility.
(Inherited from ICatchment.) |
| ObservedData |
Observed data. Used for creating calibration plots and for auto-calibration reference data.
(Inherited from ICatchment.) |
| Runoff |
Total runoff from catchment at present time step.
Unit: [m^3/s]
(Inherited from ICatchment.) |
| TimeStep |
Time step op catchment
(Inherited from ICatchment.) |
| TSBuffer |
Set the TSBuffer to use in this catchment
(Inherited from ICatchment.) |
| VolumeOnGroundAdded |
Volume of water added to catchment after a time step.
This water will be eventually routed.
|
| YearlyRunoff | Obsolete. (Inherited from ICatchment.) |
Methods| Name | Description | |
|---|---|---|
 | Accepts |
List of data types that is accepted, i.e., that you can get a ValueSetter for.
(Inherited from IQuantityProxy.) |
| Initialize |
Initialize Rainfall Runoff model. Sets up static data.
(Inherited from ICatchment.) |
| InitializePlugins |
Initializes the cathcment plugins.
(Inherited from ICatchment.) |
| Offers |
List of data types that is offered, i.e., that you can get a ValueGetter for.
(Inherited from IQuantityProxy.) |
| PerformTimeStep |
This procedure forwards the calculation with one time step.
(Inherited from ICatchment.) |
| Prepare |
Prepare Rainfall Runoff model. Sets up dynamic data so that the model is ready for first time step.
(Inherited from ICatchment.) |
| PreparePlugins |
Prepares the cathcment plugins.
(Inherited from ICatchment.) |
| ResetBoundaries |
Remove boundaries applied in previous runs
(Inherited from ICatchment.) |
| TimeOffers |
List of data types that is offered and can be used in GetValue
(Inherited from IDoubleTimeProxy.) |
| TimeOfNextUpdate | Obsolete.
Return the time of next update. Used for PostTimeStepEvent event in Catchments.
(Inherited from ICatchment.) |
| TimeValueGetter |
Get value getter for the specified data quantity
(Inherited from IDoubleTimeProxy.) |
| Type |
Type of model used in catchment
(Inherited from ICatchment.) |
| Update |
This procedure forwards the calculation such that the state includes the specified time
(Inherited from ICatchment.) |
| ValueGetter |
Get value setter for the specified data quantity
(Inherited from IDoubleProxy.) |
| ValueSetter |
Get value setter for the specified data type
(Inherited from IDoubleProxy.) |
Events| Name | Description | |
|---|---|---|
 | PostTimeStepEvent |
An event that is called everytime a timestep was successfully performed.
(Inherited from ICatchment.) |
Extension Methods| Name | Description | |
|---|---|---|
 | Getter(IQuantity) | Overloaded. From the proxy, return an FuncTResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. |
| Getter(IQuantity, IQuantity) | Overloaded. From the proxy, return an FuncTResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. |
| Getters |
Returns a set of FuncTResult for the quantity.
We can return several quantities with the same id (usually they will differ in their description).
If the quantity is not offerent, an empty list is returned.
(Defined by ProxyExtensions.) |
| GettersFraction |
Returns a set of FuncT, TResult for the quantity.
We can return several quantities with the same id (usually they will differ in their description).
If the quantity is not offerent, an empty list is returned.
(Defined by ProxyExtensions.) |
| GetterUnboxed | From the proxy, return an FuncTResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. |
| NTSGeometry |
Create an NTS geometry from the CatchmentGeometry.
(Defined by RRExtensions.)Depending on the coordinates, the returned IGeometry is either a NTS Polygon or NTS MultiPolygon. |
| Setter | From the proxy, return an IDoubleGetSet for the specified quantity. It returns the first quantity of that type that is accepted, and null if the quantity is not accepted. |
| TimeValueGetter | From the proxy, return an FuncT, TResult for the specified quantity. It returns the first quantity of that type that is offered, and null if the quantity is not offered. |
See Also