IOutlet Interface |
An Outlet is a volume free node where water flows out of the system.
An outlet is the only type of open boundary that does not need a boundary condition
An outlet can have a boundary condition (water level/QH), in which case the water can also flow into the system.
The IOutlet extends the IVolumeNode, though it can also be used outside a sewer system, in which case the GroundLevel is set to the BottomLevel. The rest of the IVolumeNode properties are not valid for a non-sewer outlet.
Namespace: DHI.Mike1D.NetworkDataAccess
Assembly: DHI.Mike1D.NetworkDataAccess (in DHI.Mike1D.NetworkDataAccess.dll) Version: 19.0.0.0 (11.1.1.1111)
SyntaxThe IOutlet type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | GroundLevel |
Level of ground at the node.
Unit: [m]
Default: 0
|
| HeadLossParameterSet |
Head loss parameters. Can be null
(Inherited from INode.) |
| Id |
Node identification string
(Inherited from INode.) |
| PressureReachNodeType |
Type of pressure reach node, used for pressurized sections of the network.
Default: None
(Inherited from INode.) |
| PressureReachTailCrestLevel |
Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section
(Inherited from INode.)Only applicable when PressureReachNodeType is Tail. Unit: [m] |
| XCoordinate |
X-coordinate of the node
(Inherited from INode.) |
| YCoordinate |
Y-coordinate of the node
(Inherited from INode.) |
Methods| Name | Description | |
|---|---|---|
 | CompareTo | Compares the current instance with another object of the same type and returns an integer that indicates whether the current instance precedes, follows, or occurs in the same position in the sort order as the other object. (Inherited from IComparableINode.) |
| Validate |
Validate the node
(Inherited from INode.) |
See Also