ILeapingWeir Interface |
A leaping weir is a junction node which connects three reaches.
The third reach is connected through a bottom opening, named
a Leaping Weir. If the water runs fast, the water may leap
over the weir, i.e. the speed of the water will effect
the flow through the weir.
The weir is characterised by a length (WeirLength) and a width (WeirWidth).
Based on the article of Oliveto, Giuseppe. (1998). "Sewerage overflows: new researches on bottom openings and side weirs". Excerpta. 12. 251-281.
Namespace: DHI.Mike1D.NetworkDataAccess
Assembly: DHI.Mike1D.NetworkDataAccess (in DHI.Mike1D.NetworkDataAccess.dll) Version: 19.0.0.0 (11.1.1.1111)
SyntaxThe ILeapingWeir type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | CdaAlpha |
Alpha in the cda = alpha - beta * psiBeta
Default value is 0.61 |
| CdaBeta |
Beta in the cda = alpha - beta * psiBeta
Default value is 0.1 |
| HeadLossParameterSet |
Head loss parameters. Can be null
(Inherited from INode.) |
| Id |
Node identification string
(Inherited from INode.) |
| OutletReachId |
ID of the outlet reach
(Inherited from IStructureNode.) |
| PressureReachNodeType |
Type of pressure reach node, used for pressurized sections of the network.
Default: None
(Inherited from INode.) |
| PressureReachTailCrestLevel |
Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section
(Inherited from INode.)Only applicable when PressureReachNodeType is Tail. Unit: [m] |
| WeirLength |
Length of a leaping weir.
Unit: [m]
Default: 0
|
| WeirWidth |
Width of a leaping weir.
Unit: [m]
Default: 0
|
| XCoordinate |
X-coordinate of the node
(Inherited from INode.) |
| YCoordinate |
Y-coordinate of the node
(Inherited from INode.) |
Methods| Name | Description | |
|---|---|---|
 | CompareTo | Compares the current instance with another object of the same type and returns an integer that indicates whether the current instance precedes, follows, or occurs in the same position in the sort order as the other object. (Inherited from IComparableINode.) |
| Validate |
Validate the node
(Inherited from INode.) |
See Also