IBoundaryItemConstant Interface |
Namespace: DHI.Mike1D.BoundaryModule
Assembly: DHI.Mike1D.BoundaryModule (in DHI.Mike1D.BoundaryModule.dll) Version: 19.0.0.0 (11.1.1.1111)
SyntaxThe IBoundaryItemConstant type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | ApplicationBegin |
Start datetime of the application of the item.
(Inherited from IAdvancedBoundaryItem.)If user specified values are set, remember also to set the UseApplicationInterval Remarks
If UseApplicationInterval is false, this is set automatically during prepare phase to either
|
| ApplicationEnd |
End datetime of the application of the item
(Inherited from IAdvancedBoundaryItem.)If user specified values are set, remember also to set the UseApplicationInterval |
| ConstValue |
Setter access for the constant value. Use GetValue to retrieve it.
|
| EumQuantity |
EUM quantity of boundary item.
(Inherited from IBoundaryItem.)Used for validation and in AD also for unit conversion. |
| IsDryWeatherFlow |
Boundary items can be marked as "dry weather flow" (used in MIKE URBAN). This is used in
Long Term Simulation to exclude dry weather flow from the total inflow when evaluating
how to start a new LTS job (if selecting a new hot start file)
(Inherited from IBoundaryItem.)This flag has no effect on the simulation, only on LTS job evaluations. |
| ScaleFactor |
A factor by which values are scaled. Default 1.0.
(Inherited from IAdvancedBoundaryItem.)Only valid for certain item types, e.g., load/inflow types, not for types like waterlevel. |
| SoftstartDuration |
Duration of softstart period. Default 0
(Inherited from IAdvancedBoundaryItem.) |
| SoftstartType |
Type of softstart. Default none
(Inherited from IAdvancedBoundaryItem.)Softstart does not make sense for all boundary types, typically only for those that otherwise can be disabled/left out of the simulation. Softstart starttime is ApplicationBegin which if not set explicitly is either
|
| SoftstartValue |
Softstart initial value. Default 0.0
(Inherited from IAdvancedBoundaryItem.) |
| UseApplicationInterval |
Boolean specifying whether the application of the item is limited in time
(Inherited from IAdvancedBoundaryItem.)Set this flag if user specified values of ApplicationBegin and ApplicationEnd is to be used. If this flag is not set the application begin and end time will be overwritten/controlled by the Boundary Data, set in Prepare(DateTime, DateTime, IDiagnostics) or by the individual boundary item. |
Methods| Name | Description | |
|---|---|---|
 | GetAccumulatedValue | Get boundary value accumulated over the specified period. It is the callers responsibility to check if the item is applicable at the given datetime before calling GetAccumulatedValue. If the item is only applicable over a part of the interval, it must return the accumulated value for that part of the interval. |
| GetNextTransitionTime |
Gets the next time for which there is a different value in the boundary item.
(Inherited from IBoundaryItem.) |
| GetValue | Get boundary value at specified date/time. It is the callers responsibility to check if the item is applicable at the given datetime before calling GetValue. |
| IsApplicable(DateTime) |
Checks whether the item is applicable at the given datetime.
(Inherited from IBoundaryItem.) |
| IsApplicable(DateTime, DateTime) |
Checks whether the item is applicable at the given time interval.
It returns true also if the item covers only a part of the
start-end interval
(Inherited from IBoundaryItem.) |
| Prepare |
Prepare item for simulation.
(Inherited from IBoundaryItem.) |
| Validate |
Validate this
(Inherited from IBoundaryItem.) |
See Also