ICatchmentNamInitial Properties |
The ICatchmentNamInitial type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | GroundWaterDepth |
Initial ground water depth.
Type: Ground water depth, Unit: [m], Default: 10.0 |
| InterFlow |
Initial interflow
Type: Discharge, Unit: [m3/s], Default: 0.0 |
| InterFlowFirstReservoir |
Initial interflow from first reservoir
Type: Discharge, Unit: [m3/s], Default: 0.0 |
| LowerBaseFlow |
Initial lower base flow
Type: Discharge, Unit: [m3/s], Default: 0.0 |
| NumberOfSnowZones |
Variable holding the number of snow zones. Setting this variable should update the
SnowStorage and WaterRetention accordingly, or at least
make sure that this number of snow zones as a minimum is available.
|
| OverLandFirstReservoirStorage |
Initial amount of water stored in the first overland reservoir.
Type: Height, Unit: [mm], Default: 0.0 |
| OverlandFlow |
Initial overland flow
Type: Discharge, Unit: [m3/s], Default: 0.0 |
| OverlandFlowFirstReservoir |
Initial overland flow from first reservoir
Type: Discharge, Unit: [m3/s], Default: 0.0 |
| OverLandSecondReservoirStorage |
Initial amount of water stored in the second overland reservoir.
Type: Height, Unit: [mm], Default: 0.0 |
| RelativeRootZoneStorageContent |
Initial relative water content in the root zone.
Relative to RootZoneStorageMax Type: Dimensionless, Unit: [], Default: 0.0 |
| RelativeSurfaceStorageContent |
Initial relative water content in the surface storage.
Relative to SurfaceStorageMax Type: Dimensionless, Unit: [], Default: 0.0 |
| SnowStorage |
Initial snow storage used when zonal approach is used. The amount of water present in the form of snow or ice.
Type: Water content as snow, Unit: [mm], Default: 0.0, Size: NumberOfSnowZones |
| WaterRetention |
Initial water retention used when zonal approach is used, the amount of water (melted) that are retained within the snow.
Type: Water content as water (melted) in snow, Unit: [mm], Default: 0.0, Size: NumberOfSnowZones |
See Also