ICatchmentData Properties |
The ICatchmentData type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AdditionalFlow |
Additional constant flow added to the total runoff
Unit: [m3/s]
Default: 0
|
| Area |
Total area of catchment
|
| CatchmentGeometry |
Geometry of the catchment. This is a list of coordinates defining a closed polygon as
the extent of the catchment.
|
| CatchmentName |
Catchment name
The name is not unique, there may be several catchment models for one catchment, however all catchments with the same name should/must share the same catchment geometry. |
| CenterPoint |
The central point of the catchment. Used for e.g. finding the
rain time series closest to this catchment.
|
| EndTime | Obsolete.
End time of catchment simulation - the latest time for which the catchment can return data
|
| ModelId |
Catchment model ID. Unique id.
|
| Name | Obsolete.
Catchment model ID. Unique id.
|
| ObservedData |
Observed data. Used for creating calibration plots and for auto-calibration reference data.
|
| Persons |
Number of person equivalent in the catchment,
used with catchment discharge source boundary
|
| StartTime | Obsolete.
Start time of catchment simulation - the earliest time for which the catchment can return data
|
| StormWaterLIDs |
StormWater LIDs connected to catchment
|
| TimeStep |
Time step used during the simulation by the catchment model
|
| UseHotStartFile |
Flag telling if initial conditions is taken from a hotstart file
Default: false
|
See Also