CatchmentNamInitial Properties

Initial base flow Type: Discharge Unit: [m3/s] Default: 0.0

Initial ground water depth. If UseInitialBaseFlow, the ground water depth is calculated from the base flow. Type: Ground water depth Unit: [m] Default: 10.0

Initial interflow Type: Discharge Unit: [m3/s] Default: 0.0

Initial interflow from first reservoir Type: Discharge Unit: [m3/s] Default: 0.0

Initial lower base flow Type: Discharge Unit: [m3/s] Default: 0.0

Variable holding the number of snow zones. Setting this variable updates the SnowStorage and WaterRetention accordingly.

Initial amount of water stored in the first overland reservoir. Unit: [mm]

Initial overland flow Type: Discharge Unit: [m3/s] Default: 0.0

Initial overland flow from first reservoir Type: Discharge Unit: [m3/s] Default: 0.0

Initial amount of water stored in the second overland reservoir. Unit: [mm]

Initial relative water content in the root zone Type: Dimensionless Unit: [] Default: 0.0

Initial relative water content in the surface storage Type: Dimensionless Unit: [] Default: 0.0

Initial snow storage used when zonal approach is used. Type: Snow Water Content Unit: [mm] Default: 0.0

Flag telling the ground water storage is initialised by a baseflow and ground water depth is derived from the baseflow, or if initialised by an initial groundwater depth and the base flow is derived from the depth.

When called from MIKE11 it is true, if called from Mouse it is false.

Default: true

Initial water retention used when zonal approach is used. Type: Max water Unit: [%] Default: 0.0