SewerJunction Properties

Level of ground at the node. Unit: [m] Default: 0

Head loss parameters for this particular node.

Node textual identification

Maximum inflow from surface, i.e. rainfall runoff type inflows.

The node inflow from surface can be limited by the surface opening, a sewer grate or similar.

Unit: [m3/s]. Default: Double.MaxValue

Type of pressure reach node, used for pressurized sections of the network. Default: None

Minimum water level in the outflow from pressurized sections, and hence also minimum water level in the pressurized section

Only applicable when PressureReachNodeType is Tail.

Unit: [m]

X-coordinate Unit: [m] Default: Constants.DOUBLE_DELETE_VALUE

Y-coordinate Unit: [m] Default: Constants.DOUBLE_DELETE_VALUE