HDAdditionalOutput Properties |
The HDAdditionalOutput type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | BedShearStress |
Bed shear stress.
|
| ControlStrategyId |
Conveyance.
|
| Conveyance |
Conveyance.
|
| DischargeHPoints |
Discharge on all H-points.
|
| DischargeStructurePoints |
Discharge in structure points.
|
| EnergyLevel |
Energy Level.
|
| EnergyLevelSlope |
Water Level Slope.
|
| FloodedArea |
Flooded area, i.e. surface area of open parts of the network.
|
| FloodedAreaTotal |
Total Flooded area.
|
| FlowArea |
Flow area in reach (cross sectional area).
|
| FlowAreaStructurePoints |
Flow area in structure points.
|
| FlowWidth |
Flow width in reach.
|
| HydraulicRadius |
Hydraulic radius.
|
| LateralInOutflows |
Lateral inflows, inflow, outflow and excess outflow correction
|
| MassError |
Mass error
|
| MassErrorAbsAccumulated |
Mass error absolute value accumulated over time
|
| MassErrorAbsAccumulatedTotal |
Mass error absolute value accumulated over time and over the entire network
|
| MassErrorAccumulated |
Mass error accumulated over time.
|
| MassErrorAccumulatedTotal |
Mass error accumulated over time and over the entire network
|
| MassErrorTotal |
Total mass error, accumulated over the entire network
|
| Quantities |
Other, not predefined, output quantities that the additional HD output
file should include.
|
| TimeStep |
Time Step
|
| VelocityStructurePoints |
Velocity in structure points.
|
| Volume |
Volume of water in network.
|
| VolumeInNodesAboveGround |
Volume of water in nodes above ground.
|
| VolumeRetainedInMaxInflow |
Volume of water in nodes above ground.
|
| VolumeTotal |
Total volume of water.
|
| WaterFlowRateAboveGround |
Flow rate to volume in nodes above ground.
|
| WaterLevelSlope |
Water Level Slope.
|
| WaterSpillDischarge |
Flow rate to volume in nodes above ground.
|
See Also