CatchmentAbstractUrbanInitialLossRecoveryRate Property

Recovery rate for initial loss capacity. The initial loss capacity is regenerated in dry periods by a linear recovery rate.

Used as constant evaporation, when evaporation is not defined explicitly. If evaporation is defined explicitly (see EvaporationFromTimeSeries), this is neglected.

Unit: [m/s] Default: 0.00005 [m/hour] = 1.2 [mm/day]

public double InitialLossRecoveryRate { get; set; }

Public Property InitialLossRecoveryRate As Double
	Get
	Set

public:
virtual property double InitialLossRecoveryRate {
	double get () sealed;
	void set (double value) sealed;
}