TimeSteppingDepthMaxRelativeChange Property

When PerformDepthRelativeCheck, then the change in relative depth change must be less than RelativeDepthLimit. For small relative depths (below this limit), the limit value used is decreased down to a minimum of 0.02 when the relative depth is zero.

This is ony evaluated in closed part of the network.

Default value is 0.1. This cannot be below 0.02.

public double DepthMaxRelativeChange { get; set; }

Public Property DepthMaxRelativeChange As Double
	Get
	Set

public:
property double DepthMaxRelativeChange {
	double get ();
	void set (double value);
}