UrbanRiverLink Methods

Adjust water level boundary value. When external water depth is small, a similar small depth is applied to MIKE 1D, handling differences in external and 1D bottom levels.

Apply smoothing on the water level value.

Smoothing must be applied after calling AdjustWaterLevelBoundaryValue.

Assign external concentrations to outlet boundary.

Assign water level to outlet boundary.

Check bottom levels of outlet and surface, and produce a warning if there is a mismatch.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Discharge out of link into external model, positive into external model.

Set boundary concentration for component at index compj, i.e. concentration on the outside of the network.

Serves as the default hash function.

Outflow concentration, concentration in MIKE 1D.

Get outlet/link node

Internal ground level

Get compass heading in degrees of outlet outflow direction.

Get raw water level from source point

Get water level from source point, and adjust for bottom levels from each side of the link. Water level is stored for later use

Gets the Type of the current instance.

Water level on the internal side of the link

Get value of the water level that was applied to the outlet boundary

Initialize standard link

Creates a shallow copy of the current Object.

Prepare running with AD. Setting up AD boundaries on outlet.

Prepare link, reassing boundary to network

Set boundary concentration for component at index compj, i.e. concentration on the outside of the network.

Set external concentrations for all components

Set the external coupled area

Set the external ground level

Set external water level

Id of internal components.

Required for setting up the internal boundary condition.

Set outlet/link node.

Returns a string that represents the current object.

Prepare for time step, transferring current values to "old" values state